Aldi Ireland - New Fleet Driver

Aldi Ireland - New Fleet Driver

Hi Team,

When you receive a request from one of the fleet managers at Aldi Ireland to add "Postpaid Public Chargers" plan to a new driver in their fleet, please follow the procedure below.

  1. Locate the driver in the Operator Portal
    1. go to Users -> Drivers -> search for the driver's name or email address
    2. tick the box on the left side of the driver's record -> click Groups -> Add To Group -> select one of the drivers sub-groups under "Aldi Ireland" (based on the instructions in the email from fleet manager)

2. Edit the driver's profile
3. Add a new contract for the "Postpaid Public Chargers" plan
4. Save changes to the driver
5. Reply to the Aldi fleet manager with confirmation

    • Related Articles

    • Setting Up WiFi on Zappi V2 - Via Apple Device

      The current generation of myenergi products have Wi-Fi allowing them to connect to the internet. This article will guide you through connecting via Apple Device Access Point Method Initial Reset (May be required) The WIFI module is switched on by ...

    • Terms and Conditions

      Terms and Conditions General Terms and Conditions Company: Hall Power Ltd. trading as ePower (“ePower”, “we”, “us”, “our”) Registered Office: 1 Technology House, Rockgrove Industrial Estate, Little Island, Cork T45 CC03 Email: admin@ePower.ie ...

    • Check Grid CT / Installation Limit / Grid CT Lost

      Overview The error message Check Grid CT / Installation Limit / Grid CT Lost. This error shows it's often one of the reasons below for the fault. More than one CT is set to "Grid" Only one CT (or set of three CTs in a three-phase system) should be ...

    • PE Fault

      Overview Within Zappi the PE check is an advanced feature in the zappi which is not provided by most other EV chargers. It uses the impedance of the supply back to the primary transformer to confirm the continuity of the earth conductor so in some ...

    • zappi v1 with V5 Firmware?

      IMPORTANT The original zappi v1 cannot be updated to the latest v5 firmware. If you have other myenergi devices as well as the zappi v1 then do not update the firmware. If you have a zappi v1 and another myenergi device (an eddi or zappi) then there ...