Setting up WiFi - WPS (Wi-Fi Protected Setup)

Setting up WiFi - WPS (Wi-Fi Protected Setup)

Overview

The current generation of myenergi products have Wi-Fi allowing them to connect to the internet.

This article will guide you through connecting via WPS (Wi-Fi Protected Setup).


Set-Up

To complete the WIFI setup for your Myenergi product, please follow the below steps:
 
1. Navigate to the menu as shown in the image.
WPS Map.png
 - If the 'Wi-Fi' option is showing as 'Off', select it and press '+' to turn it on. 
 
However, if it does not turn on and an ethernet cable is plugged in, then you need to contact Technical Support at Support@myenergi.com or call 0333 300 0313.
 
2. After turning on the Wi-Fi, select 'WPS Activate' from the menu.
 
3. Press the WPS button on your router when prompted. Please note that the WPS button is different on every router.
WPS_Buttons.jpg
4. Once you press the WPS button on your router, return to the Myenergi product and press +/Tick.
 
6. Wait until the screen on your Myenergi product shows 'Connected' to complete the WIFI setup.
 
- In case it doesn't show up the first time, repress the WPS button on the router and activate WPS via Myenergi Product to try again.
 
7. Once the product displays WIFI CONNECTED, it means your product is now connected to your router.
 
Now your product is connected 

If you require further assistance please create a ticket to our support team here


    • Related Articles

    • Setting Up WiFi on Zappi V2 - Via Apple Device

      The current generation of myenergi products have Wi-Fi allowing them to connect to the internet. This article will guide you through connecting via Apple Device Access Point Method Initial Reset (May be required) The WIFI module is switched on by ...
    • Setting Up WiFi on Zappi V2 - Via Android Device

      Overview The current generation of myenergi products have Wi-Fi allowing them to connect to the internet. This article will guide you through connecting via the Android Device Access Point Method Initial Reset (May be required) The WIFI module is ...
    • Why does my device keep losing Wi-Fi connection? (Wi-Fi Strength Check)

      Overview Wi-Fi strength, measured in dBm (decibel milliwatts), indicates the power level of the signal received by your device from a Wi-Fi router or access point. dBm is a logarithmic unit used to express power relative to 1 milliwatt (mW). The ...
    • How to check the IP address of the server (zappi 2)

      Overview Although the latest versions of zappi, eddi and libbi all come with built-in WiFi and Ethernet, the older models only use a radio link to communicate with each other and the myenergi hub. Where the radio link is weak it is now possible to ...
    • Zappi v2 Navigation Menus

      Zappi Navigation Menus Main Menu Options Description Charge Log Today Log of charge sessions Yesterday Week Month Year Total Custom Date Event Log Today Log of events Yesterday Week Custom Date WCS Readings READINGS 1/9 Status: Mode: Current status ...